DETERMINATION OF INDUSTRIAL WASTE-BASED PROPERTIES OF STRUCTURAL HEAT PROTECTION AERATED CONCRETE BETON

Mualliflar

  • Said Shaumarov Tashkent state transport university ##default.groups.name.author##
  • Sanjar Kandakharov Tashkent state transport university ##default.groups.name.author##
  • Zafarjon Okilov Tashkent state transport university ##default.groups.name.author##
  • Gulnoza Sultonkhodjayeva Tashkent state transport university ##default.groups.name.author##

##semicolon##

https://doi.org/10.56143/3030-3893/2023-1-4-9

##semicolon##

Aerated concrete beton, strength, porosity, thermal protection, water-cement ratio

Abstrak

This article presents the results of experimental studies that describe the parameters and properties of the porous structure of aerated concrete based on industrial waste. The structurally optimal parameters reflecting the physical, mechanical, and thermal properties of the foam concrete exterior wall structures have been determined. The test results were carried out in research laboratories using gas-block structures with high porosity and optimal composition, and an improved technology of autoclave aerated concrete was proposed.

##submission.downloads##

Nashr qilingan

2025-12-19

Nashr

Jild 1 Nomeri 1 (2023): Engineer

Bo'lim

Статьи

##submission.howToCite##

DETERMINATION OF INDUSTRIAL WASTE-BASED PROPERTIES OF STRUCTURAL HEAT PROTECTION AERATED CONCRETE BETON. (2025). Международный научный журнал «Инженер», 1(1), 4-9. https://doi.org/10.56143/3030-3893/2023-1-4-9

Xuddi shu muallif (lar) ning eng ko'p o'qilgan maqolalari

O'xshash maqolalar

##common.pagination##

Siz ham ushbu maqola uchun {$ advancedSearchLink} olishingiz mumkin.