Analysis of measurement of harmonic power of non-sinusoidal currents in modern electrical networks
Аннотация
Precise measurement of power and other AC parameters is essential across all levels of the electrical power system, benefiting both suppliers and consumers. Traditionally, measurement devices have been designed under the assumption that voltage sources produce sinusoidal waveforms and that loads are linear, resulting in sinusoidal currents. However, with the growing prevalence of non-linear loads and the increasing demand for measurement accuracy, these assumptions often no longer hold true. As a result, there is a growing focus on understanding how non-linear loads affect measurement accuracy and on developing new instruments capable of operating reliably under non-sinusoidal conditions in power networks. This study contributes to that effort by developing and validating a digital sampling wattmeter designed for accurate measurement under non-sinusoidal conditions, meeting standard laboratory precision requirements. It also seeks to enhance understanding of the challenges involved in measuring in such environments.
Литература
[2] Siddikov I. K. et al. Statistical descriptions of multiphase current sensers of reactive power control systems in renewable power supply power systems //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2789. – №. 1.
[3] Abubakirov A., Kurbaniyazov T., Bekimbetov M. Analysis of three-phase asymmetrical currents in the secondary voltage of signal change sensors in the power supply system using graph models //E3S Web of Conferences. – EDP Sciences, 2024. – Т. 525. – С. 03013.
[4] Kurbaniyazov, Timur Urunbayevich (2023) "Models of physical-technical effects in the processes of changing three-phase asymmetrical currents into a signal in the appearance of secondary voltage," Chemical Technology, Control and Management: Vol. 2023: Iss. 5, Article 7.
[5] Kurbaniyazov T. U., Bazarbaev A. B. Modeling the processes of conversion of asymmetrical three-phase currents into output voltage //TASHKENT STATE TRANSPORT UNIVERSITY ENGINEER. – 2024. – Т. 2. – №. 4. – С. 2024.
[6] Abubakirov, A. B., Tanatarov, R. J., Kurbaniyazov, T. U., & Kuatova, S. B. (2021). Application of automatic control and electricity measurement system in traction power supply system. ACADEMICIA: An International Multidisciplinary Research Journal, 11(3), 180-186.
[7] Bazarbayevich A. A., Urunbayevich K. T., Pirnazarovich N. M. Reactive power and voltage parameters control in network system //innovative achievements in science 2022. – 2022. – Т. 2. – №. 13. – С. 16-20.
[8] Blake J., Williams W., Glasov C., Bergh.R., Fetting K., Hadley E., and Sanders G., “Optical Current Transducers for High Voltage Applications”, 2nd EPRI Optical Sensors Systems Vorkshop, Atlanta, Jan. 2000.
[9] Kh, Siddikov I. "Permissible Voltage Asymmetry for Asynchronous Motor Control in Non-Nominal Operating Situations." American Journal of Social and Humanitarian Research 3.9 (2022): 55-64.
[10] Kurbaniyazov, T. U. (2022). Distributed Active and Reactive Power Control With Smart Microgrid Demonstration. Middle European Scientific Bulletin,30,1-9.
[11] Siddikov I.Kh., Sattarov Kh.A., Khujamatov H.E. Research of the Influence of Nonlinear Primary Magnetization Curves of Magnetic Circuits of Electromagnetic Transducers of the Three-phases Current // Universal Journal of Electrical and Electronic Engineering. Horizon Research Publishing Corporation, USA. 2016, Vol.4(1), pp. 29 - 32, http://www.hrpub.org.
[12] Montoya F. G. et al. Analysis of power flow under non-sinusoidal conditions in the presence of harmonics and interharmonics using geometric algebra //International Journal of Electrical Power & Energy Systems. – 2019. – Т. 111. – С. 486-492.
