Determination of the constructive sizes of cavitation mixers

Authors

  • Sh. Kasimov Tashkent State Transport University Author
  • O. Anorov Tashkent State Transport University Author
  • N. Shomurodov Tashkent State Transport University Author

DOI:

https://doi.org/10.56143/9xr1rv28

Keywords:

cavitation technologies, emulsion, suspension, dispersion, enzyme, flow hydrodynamics, two-phase flow, lattice mixer, schematic diagram, turbulent, vapor condensation, subsonic flow, minimum energy.

Abstract

Studies have shown that the mixing device uses hydrodynamic cavitation principle of the greatest interest from
the point of view of obtaining a highly dispersed finished product, with large – scale production of low – power
consumption and high reliability of operation of the mixing device. Implemented definition of physical modeling
and mathematical model of the process. Defined the optimal basic geometric characteristics of the
hydrodynamic jet dispersants – cavitators.

Downloads

Published

2026-01-27

Issue

Vol. 1 No. 1 (2025): Engineer (Special Issue)

Section

Статьи